Brick Frame V2 available now

Our new Brick Frame V2s are available now! We are now producing frames in our own machine shop in Helena, MT. This has been a long term goal of ours and had been slowly working away at building up our shop. With the closing of FBM, it was do or die, and we had to push all our investments into the shop to get things going. With the help of John Corts of WORK FRAMES & JCORTS METALWORKS, our new V2 models were produced. John has welded and built all the previous runs of our frames from FBM so it only made sense for him to help again. If you aren’t into what we offer, I suggest you contact him for a high quality BMX frame.

The Brick V2 has some minor revisions to it that I felt would only improve the model. We shortened the rear end from 13.1” to 13 even. Went with S bend Chainstays for more sprocket and tire clearance, and a butted top tube to help with weight savings. I also decided on a 3/4” tube seat stay bridge instead of 5/8” on the V1, this helps stiffen up the rear end and help against side loads.

V2 Specs:

75* HT

71* ST

9” Standover

11.75” BB

13” CS

Butted Top tube

S bend Chainstays

1/4” Thick Dropouts

Laser Cut WH top gusset

Made in our machine shop in Helena, MT